Network Templete

Point-to-Point Protocol over Ethernet (PPPoE) Configuration

Anonymous 7:14:00 PM

There are 8 steps for configuring PPPoE on an Ethernet interface are as follows: Step 1: Configure PPPoE (External Modem) E...

Point-to-Point Protocol over Ethernet (PPPoE) Configuration

Reviewed by Anonymous on 7:14:00 PM Rating: 5

Anonymous 2:38:00 PM

Router Branch =========== Router>enable Router#configure terminal Router(config)#hostname Branch Branch(config)#interface tunnel0 Br...

Generic Routing Encapsulation (GRE) Tunnel Configuration

Reviewed by Anonymous on 2:38:00 PM Rating: 5

Anonymous 2:20:00 PM

Router R1 ======= Router>enable Router#configure terminal Router(config)#hostname R1 R1(config)#interface serial s0/0/0 R1(config-if...

Establishing WAN Connectivity - Point-to-Multipoint Frame Relay Using Subinterfaces and EIGRP

Reviewed by Anonymous on 2:20:00 PM Rating: 5

Anonymous 8:47:00 AM

Point-to-Point Frame Relay Using Subinterfaces and OSPF ========================================== Houston Router =========== Router...

Establishing WAN Connectivity - Point-to-Point Frame Relay Using Subinterfaces and OSPF

Reviewed by Anonymous on 8:47:00 AM Rating: 5

Anonymous 8:01:00 AM

Router 1 ====== Router>enable Router#configure terminal Router(config)#hostname Router1 Router1(config)#username admin password c...

Configuring Serial Encapsulation - HDLC and PPP

Reviewed by Anonymous on 8:01:00 AM Rating: 5